The construction of a deck is a great option to add value to your outdoor space. However, to ensure your project goes smoothly, a precise estimation of the material is vital. One of the most important factors in the process is to determine the number of decking boards (terasová prkna) you’ll need. Here’s a quick guide to help you make the calculation.
1. Measure Your Deck Area
Start by measuring the total surface of the deck. If your deck has a rectangular shape, the procedure is fairly straightforward: simply multiply its length and width. For decks with irregular shapes split the deck into smaller rectangles or squares, measure each section, and then combine the dimensions.
For instance, if your deck has a size of 12 feet x 20 feet the total area is 240 square feet (12 x 20).
2. Determine Deck Board Dimensions
Decking boards come in various sizes The most popular measurements are 5.5 inches wide and one inch thick. The length may vary, but let’s assume that a typical length of 12 feet in this case. Convert the dimensions of your board into feet to simplify calculation. A 5.5-inch wide board is approximately 0.46 foot wide.
3. Calculate Coverage per Board
To find out how much area a board covers, first find how wide in feet, and then divide by the length. If a board is 12-feet long, as well as 0.46 feet across, area covered by a board would be 5.52 square feet (12 5.52 x 0.46).
4. Account for Gaps and Waste
When decking boards are installed the gaps between them are essential for adequate draining and expanding. In general you need to consider an area of 1/8 inch to 1/4 inch. This reduces the area that is of the boards.
It is also important to keep track of the possibility of cuts and waste. The best general rule of thumb is to add about 10 percent to the number of boards required. This extra will make up for any errors, cuts or warped boards.
5. Perform the Final Calculation
The deck’s total surface is divided by deck deck by the area covered by one board to determine the number of boards needed. In our example, if you have a deck size is 240 sq. feet, and each board covers 5.52 acres, then you’ll need around 44 boards (240 / 5.52).
Adding 10% for the waste, you’ll have 49 boards (44 multiplied by 1.10).
6. Purchase Additional Supplies
Apart from wooden decking, it is possible to also require braces, joists, and possibly additional materials for the frame and support. Be sure to have the required items in your possession prior to beginning your project.
By following these steps, you can accurately estimate the amount of decking boards required to complete your project. This will help you avoid overestimating and costly trip to the store for hardware. Have fun building!
